Check the address: BMO, bushfire prone area and BAL
For properties in Warrandyte, Eltham, Diamond Creek, Hurstbridge, St Helena and Plenty, bushfire mapping deserves an early check. Bushland edges, vegetation and slopes can change the assessment from one property to the next. Do not assume an entire suburb is covered by a Bushfire Management Overlay (BMO), or assign a BAL from its postcode.
Read more about Check the address: BMO, bushfire prone area and BAL
A designated bushfire prone area is a building-system designation. The BMO is a planning control for very high or extreme bushfire hazard, with requirements that can include defendable space, water supply, access and vegetation management. They are related but not interchangeable. Search the exact address in VicPlan, then ask the council and building surveyor which planning and building approvals apply to the proposed deck.
A suitably qualified assessor considers vegetation type, separation distance and effective slope when determining bushfire exposure. The assessment informs the construction requirements; it does not replace a permit or approval. Deck placement, height and connection to the house need to be included in the design review.
AS 3959 decking: choose the whole system
AS 3959, Construction of buildings in bushfire-prone areas, sets out construction provisions for different BALs. Check the edition and amendments adopted for your approval with your building surveyor. Decking requirements depend on the BAL and construction details, including proximity to vulnerable glazing and the treatment of the subfloor space.
Read more about AS 3959 decking: choose the whole system
BAL-12.5, BAL-19 and BAL-29
These levels represent increasing ember and radiant-heat exposure. Timber may be an option under the applicable decking provisions, but there is no universal “any hardwood is compliant” rule. Confirm species, dimensions, framing and the relationship to doors and windows before ordering.
BAL-40 and BAL-FZ
Higher exposure needs more restrictive construction or an appropriately tested system. BAL-40 evidence does not cover BAL-FZ, where direct flame contact is expected. Obtain specialist design advice and approval for the complete proposed assembly rather than extrapolating from a lower rating.
Bushfire-resisting timber choices
AS 3959 recognises bushfire-resisting timber species including Spotted Gum, Merbau, Blackbutt, River Red Gum, Silvertop Ash, Red Ironbark and Turpentine. This is a defined material category, not a claim that timber is non-combustible. Species recognition alone does not certify a deck or make it suitable at every BAL.
Read more about Bushfire-resisting timber choices
Compare Spotted Gum decking and Merbau decking for appearance and maintenance once the permitted material options are established. Ask for species identification and the proposed board dimensions in the quote. Fixings, supporting members, gaps and any screening or enclosure also need to match the approved details. An oil finish or an unverified “fire-resistant” coating is not a substitute for compliant construction.
Composite decking: verify the exact certified product
A composite board is not automatically bushfire compliant. Brands may offer several ranges with different certifications. Check the current certificate, maximum BAL and installation instructions for the exact product; do not transfer a rating between ranges, profiles or manufacturers.
Read more about Composite decking: verify the exact certified product
ModWood Flame Shield is one documented example: the manufacturer specifies use up to BAL-40, with testing to AS 1530.8.1 and particular construction conditions. Its January 2026 instructions require non-combustible or specified bushfire-resisting timber joists and bearers, prohibit board overhang beyond joists, and set ventilation and fixing requirements. This is an example of product evidence, not a promise that it suits your property or that Deck It Out has installed that system at your BAL.
Use our Melbourne composite decking service to discuss material options, then have the proposed certified assembly checked against your assessment and approval. Non-combustible alternatives may also be appropriate where the design requires them.
What to bring to a bushfire decking quote
- Your address, planning property report and any BMO schedule or existing permit conditions.
- A current BAL assessment applicable to the proposed works, if available.
- Deck dimensions, levels, nearby windows and doors, and whether the deck is attached or freestanding.
- The exact proposed board, certification and subframe specification—not just a brand name.
- Required approvals, inspections and documentation, confirmed by the council and building surveyor.
Keep leaf litter and combustible storage from accumulating around and beneath the deck, and maintain the property’s approved bushfire measures. Compliant construction improves resistance; it cannot guarantee survival in a bushfire. This guide is general information, not a BAL assessment or certification of your design.
Bushfire decking questions
Is every property in Warrandyte or Eltham in a Bushfire Management Overlay?
No. Bushfire controls are mapped property by property. Check the exact address in VicPlan for the Bushfire Management Overlay and designated bushfire prone area status; a suburb name does not establish either status or a BAL rating.
What is the difference between BMO and BAL?
The Bushfire Management Overlay is a planning control for areas of very high or extreme bushfire hazard. A Bushfire Attack Level describes a building’s assessed exposure to embers, radiant heat and flames and informs construction requirements. A BMO is not a BAL assessment.
Can Spotted Gum and Merbau be used for BAL-rated decking?
Spotted Gum and Merbau are among the bushfire-resisting timber species recognised in AS 3959. Their suitability depends on the assessed BAL, the specific decking provisions, board dimensions, nearby glazing and the complete deck design. They are not automatically suitable for every BAL or every installation.
Is all composite decking bushfire compliant?
No. Compliance is product- and system-specific. Obtain current certification for the exact board range and check its BAL limit, subframe, ventilation, fixing and installation conditions. A certificate for one product cannot be applied to every composite board from that brand.
Can composite decking be used at BAL-40?
Some specific systems can. ModWood Flame Shield is a manufacturer-documented example tested to AS 1530.8.1 for use up to BAL-40 subject to its certification and fixing instructions. This does not establish suitability for BAL-FZ or certify other ModWood products.
Does a BAL-rated deck guarantee protection from bushfire?
No. Bushfire construction requirements aim to improve resistance, not guarantee survival. The approved design, defendable space, vegetation management, access and ongoing maintenance all matter. Your building surveyor must confirm the requirements for the proposed work.
Local decking planning
Discuss your property in these service areas; coverage does not establish its bushfire overlay or BAL.
Sources and technical guidance
- Planning Victoria: bushfire prone areas, BMO and BAL
- VicPlan: check the exact property’s planning controls
- Building and Plumbing Commission: bushfire attack levels
- WoodSolutions: timber construction requirements by BAL
- ModWood Flame Shield: product certification and specifications
- ModWood Flame Shield: January 2026 fixing instructions
Discuss your decking plans
Share your site details and any existing assessment with Deck It Out before settling on materials.
Request a decking quoteMelbourne decking services